Comparison of two kinds of manufacturing technology on compound Fructus crataegi granule

ZHANG Chao-shen; YANG Lin; AN Ye; ZHONG Wei-chao; YAO Feng

doi:10.3969/j.issn.1006-0111.2012.03.018

Message Board

Respected readers, authors and reviewers, you can add comments to this page on any questions about the contribution, review, editing and publication of this journal. We will give you an answer as soon as possible. Thank you for your support!

Name
E-mail
Phone
Title
Content
Verification Code

x Close Forever Close

PDF
Cite
Share

facebook

twitter

google

linkedin

Volume 30 Issue 3

Turn off MathJax

Article Contents

Article Navigation > Journal of Pharmaceutical Practice and Service > 2012 > 30(3): 220-221

ZHANG Chao-shen, YANG Lin, AN Ye, ZHONG Wei-chao, YAO Feng. Comparison of two kinds of manufacturing technology on compound Fructus crataegi granule[J]. Journal of Pharmaceutical Practice and Service, 2012, 30(3): 220-221. doi: 10.3969/j.issn.1006-0111.2012.03.018

Citation:

ZHANG Chao-shen, YANG Lin, AN Ye, ZHONG Wei-chao, YAO Feng. Comparison of two kinds of manufacturing technology on compound Fructus crataegi granule[J]. Journal of Pharmaceutical Practice and Service, 2012, 30(3): 220-221. doi: 10.3969/j.issn.1006-0111.2012.03.018

Comparison of two kinds of manufacturing technology on compound Fructus crataegi granule

doi: 10.3969/j.issn.1006-0111.2012.03.018

Department of pharmacy, General hospital of Shenyang military region, Shenyang 110016,China

Received Date: 2012-04-01
Rev Recd Date: 2012-04-25

Abstract

Objective To establish the best manufacturing technology of compound Fructus crataegi granule. Method The craft of manufacturing between swing prilling and atomizing prilling was studied. The output , properties, solution in water and total flavonoids were taken as test index. Result The output reached 130 kg, the granule was hole shape, uniformly sized and good fluidity after adopting the atomizing prilling. Conclusion The atomizing prilling was better than swing prilling in manufacturing.
- swing prilling,
- atomizing prilling,
- output,
- properties,
- solute

References

[1]	朱杰东,张相宜,马葵芬,等.复方蒲黄颗粒制备工艺研究[J].浙江中医药杂志,2011,46(7):533.
[2]	刘金城,杭清,楼云雁,等.复方茵柏颗粒剂成型工艺研究[J].中华中医药学刊,2010,28(3):646.
[3]	张霞,王荣,王文萍,等.复方芸归颗粒制备工艺研究[J].中华现代应用药学,2011,28(3):222.
[4]	中国药典2010年版［S］.一部,2010:32.

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views(4205) PDF downloads(974) Cited by()

Proportional views